The occupational agents we assess

They are grouped into three categories according to their nature. For each category, we conduct the industrial hygiene measurements required by health and safety regulations.

01

First, the study

We identify the agents present at each workstation and assess the risk of exposure. The study determines what needs to be measured and which strategy should be followed.

02

Then, the measurements

We quantify actual exposure using calibrated equipment and compare the results against the applicable limit values.

01

Physical agents

Forms of energy present in the working environment that may damage health through prolonged exposure. They are identified individually and measured using calibrated equipment.

We organise them by type of agent, as each one requires a specific measurement.

Lighting

Lux measurements to assess existing lighting levels in workplaces.

Noise

Sound-level and noise-dosimetry measurements. The measurement strategy is designed around the task, th workstation or the full working day, depending on the characteristics of the workstations being assessed.

Vibration

Assessment of workers’ exxposure to whole-body and hand-arm vibration. Acceleration is measured to determine the normalized daily exposure value A (8).

Thermal environmental conditions

Measurement of temperature, relative humidity and air speed to assess environmental conditions in workplaces.

Heat and cold stress

Measurement of environmental parameters and calculation of specific indices: the WBGT index and heat strain for hot environments, and the IREQ index for cold environments.

 

Do you need this measurement?

Electromagnetic Radiation

Measurement of electric and magnetic fields and comparison against the applicable action levels and exposure limit values.

Ionizing Radiation · Radon

Measurement of radon gas in workplaces in accordance with Royal Decree 1029/2022.

 

Do you need this measurement?
02

Chemical agents

Substances present in the workplace. We identify hazardous chemical agents in the working environment.

As there are hundreds of agents, we have organised them by type of practice.

Qualitative assessment

Identification of hazardous chemical agents in the workplace

Identification of carcinogenic, mutagenic and reprotoxic substances (CMRs). The exposure risk is assessed according to their hazardous properties, the quantities used, the characteristics of the process, the frequency and duration of the tasks and the existing control measures.

Quantitative assessment

Measurement of airborne agent concentrations

Samples are taken from the worker’s breathing zone, analyzed in a laboratory and subsequently compared against the occupational exposure limit.

Respirable Crystalline Silica (RCS)

Construction and civil engineering
Quarries
Dental technicians
Marble and stone workshops

Asbestos

Roofs and insulation
Pipes and downpipes
Tanks and coatings
Waste treatment

Removal or maintenance of old materials that may contain asbestos.

Diesel exhaust fumes

Workshops and garages
Tunnels and mines
Construction sites
Warehouses
Generators

Hardwood and softwood dust

Carpentry workshops
Cabinetmaking and furniture manufacturing
Panel manufacturing

Cutting, sawing, sanding, planing and machining of wood.

Formaldehyde

Healthcare facilities
Pathology departments
Funeral services and embalming
Resins and disinfectants
Wood-based panels

Diisocyanates

Furniture manufacturing -foams and finishes-
Automotive industry
Construction and insulation
Metallurgy (foundry moulds)
Paints, varnishes and lacquers
Pharmaceutical and chemical industries

Flour dust

Bakeries and pastry shops
Food-production workshops
Flour mills and animal-feed factories
Food industry
03

Biological agents

Microorganisms, cell cultures and human endoparasites capable of causing infection, allergies or toxicity. Here, too, we begin with the type of study.

As there are hundreds of agents, we have organised them by type of practice.

Qualitative assessment

Qualitative biological risk study

This study makes it possible to prioritize preventive and control measures, both in activities involving deliberate handling and in activities where biological agents are not deliberately handled.

Quantitative assessment

Industrial hygiene measurements to quantify biological agents

Indoor air-quality study determining airborne mesophilic aerobic flora (bacteria), airborne fungal flora (fungi) and total volatile organic compounds.

Deliberate handling

Microbiological diagnostics
Research laboratories
Research involving infected animals
Pharmaceutical industry
Food and agricultural industry
Effluent treatment
Remediation of contaminated soil
Biodegradation of fats

Activities in which a biological agent is intentionally used or handled.

No deliberate intention to handle biological agents

Food production
Agricultural work
Contact with animals
Products of animal origin
Healthcare
Isolation services
Pathology
Clinical and veterinary laboratories
Waste disposal
Wastewater treatment plants

Exposure occurs as a consequence of the work without the agent being deliberately handled. Microbiological diagnostic laboratories are excluded.

Request a quote

Tell us that you need to measure

Select the measurements you need and leave us your details. You will speak with our technical team to find the solution that best meets your needs.

FORM

* Required fields:
Noise measurement
Machinery vibration measurement
Radon measurement
Heat-stress measurement
Lighting measurement
Thermal environmental conditions and indoor-quality measurement
Electromagnetic radiation measurement
Chemical-agent measurement
I authorise the processing of my data provided through the contact form. *
I authorise my data to be shared with companies within the group (GESEME ASISTENCIAL and GESEME MEDICOS, SL), so that they may send me information about products and services that may be of interest to me.
I have read the Privacy Policy. *

Frequently asked questions (FAQs)

What is industrial hygiene and how does it differ from health and safety at work?

Occupational hygiene is the preventive specialism that identifies, assesses and controls workers’ exposure to physical, chemical and biological agents, with the aim of preventing occupational diseases. Health and safety at work, on the other hand, focuses on preventing accidents and immediate injuries caused by machinery, installations, equipment, tools or unsafe conditions.

Both form part of the four specialisms recognised by Spanish Royal Decree 39/1997, alongside ergonomics and applied psychosociology, and occupational medicine. The practical difference lies in the timeframe: an accident is immediate, whilst damage caused by exposure to noise, dust or chemical substances may take years to manifest.

 

Not all companies are required to carry out regular occupational hygiene measurements. The regulations require that occupational risks be assessed and measurements taken where necessary to determine the level of exposure to chemical, physical or biological agents and to put in place appropriate preventive measures.

The need for such measurements depends on the nature of the work, the processes involved, the substances used and the conditions at the workplace. It may be mandatory or advisable to measure risks such as noise, vibrations or exposure to certain chemical agents. The assessment must be reviewed when working conditions change, new products or equipment are introduced, or there are indications that the risk may have increased.

Qualitative assessment and hygiene monitoring are two complementary tools. Qualitative assessment analyses working conditions, products, processes and potential exposure in order to evaluate the risk without necessarily always obtaining a numerical result. Hygiene monitoring uses specific equipment and methods to quantify that exposure, for example, the concentration of a chemical agent or the noise level.

Not all risks require measurement. However, where a qualitative assessment does not allow the level of exposure to be determined with sufficient reliability, measurements must be carried out to compare the results with reference values and to define appropriate preventive measures.

The Inspectorate may require you to carry out risk assessments and measurements within a specified timeframe. Failure to carry out the assessments, their updates or the relevant periodic checks constitutes a serious offence under the Law on Offences and Sanctions in the Social Order (LISOS).

If an employee develops an occupational disease linked to an exposure that was not assessed, the company may have to pay a surcharge on Social Security benefits and face liability claims. Keeping measurements up to date is the way to demonstrate that the risk is under control.

  • A list of posts, tasks and the number of people per post, including working hours and shifts.
  • The safety data sheets for the chemicals used.
  • A list of machinery and equipment that generate noise or vibrations.
  • Previous assessments and measurements, if available.
  • A contact person who is familiar with the processes.

Firstly, take action: identify the causes and implement measures to reduce exposure below the limit. The order of priority is:

  1. Eliminate or replace the agent.
  2. Implement technical measures: localised extraction, isolation or enclosure.
  3. Implement organisational measures: job rotation or reduction of exposure times.
  4. Use personal protective equipment as a supplementary measure.

To find this out, a risk assessment for chemical agents must be carried out, which is mandatory under Article 3 of Royal Decree 374/2001. The occupational hygiene specialist identifies all the substances present at each workstation, assesses how and to what extent each person is exposed and, if the risk cannot be ruled out, measures the concentration of the agent in the workplace air.

The assessment follows four steps:

  1. Inventory of chemicals, including a review of their safety data sheets (SDSs)
  2. Identification of agents not listed on any safety data sheet: fumes, dusts and vapours generated by the process itself, and products used in cleaning, maintenance or repair tasks, which the regulation expressly requires to be assessed.
  3. Risk assessment, based on the hazard level of each agent, the quantities involved, the frequency and duration of the tasks, and the existing control measures.
  4. Exposure measurement: in the breathing zone, and comparison with occupational exposure limits (OELs). If it is concluded that measurement is not necessary, the assessment must document the reason.

The result tells you which agents are present, which ones each workstation is exposed to, and which preventive measures you should prioritise.